110v Oil Free Roll Cage Direct Drive Compressor
Roll Cage OM195/6-110v
. Light weight
. Extremely easy to use
. Designed for site use where additional safety is required
. Oil free unit provides low maintenance
. Due to the absence of oil, there is no risk of oil spillage during transportation
. 7.1 cfm, 115 psi
. 1.5 hp 110v
. 6 litre and 24 litre air receivers available
Oil Free Direct Drive Compressor
. Light weight
. Extremely easy to use
. Ideal for all DIY applications
. Suitable for home, car and gardening maintenance
. 5.6 cfm, 115 psi
. 1.5 hp 240v
. 6 litre receiver
Direct Drive 2hp 24ltr Oil Lubricated Air Compressor
. Extremely easy to use
. Ideal for all DIY applications
. Suitable for home, car and gardening maintenance
. 7.28 cfm, 115 psi
. 2 hp 240v
. 24 litre receiver
Direct Drive 2hp 50ltr Oil Lubricated Compressor
. Extremely easy to use
. Ideal for all DIY applications
. Suitable for home, car and gardening maintenance
. 7.28 cfm, 115 psi
. 2 hp 240v
. 50 litre receiver
(Also available with 3hp motor - 14.5 cfm, 115 psi)
PCL retractable hose real, wall mountable
Available in the below sizes;
8 bar - 8mm I.D x 8mtr, 1/4 BSP male thread
8 bar - 8mm I.D x 10mtr, 1/4 BSP male thread
17 bar - 10mm I.D x 10mtr, 1/4 BSP male thread
17 bar - 10mm I.D x 15mtr, 1/4 BSP male thread
17 bar - 12mm I.D x 15mtr, 1/2 BSP male thread
17 bar -12mm I.D x 18mtr, 1/2 BSP male thread
PCL Tyre Inflators
Single Clip On Open Or Closed £9.50
Twin Hold On Open Or Closed £10.73
Tyre Inflator,MK3 Single Clip On £59.50
Tyre Inflator ,MK3 Twin Hold On £61.11
PCL High Vis Hoses
Available in the below sizes;
10mm I.D x 10mtr, 1/4 BSP female thread
10mm I.D x 15mtr, 1/4 BSP female thread
10mm I.D x 20mtr, 1/4 BSP female thread
John Guest Speed Fit Airline pipe and Fittings
A push fit system of fittings and pipe providing rapid installation of a compressed air pipework system. Both during and after installation the system can easily be modified. Can be installed with basic tools.
Piping comes in 3 meter lengths and available in various sizes with fittings.
Various Blow Guns
BL 1 Palm gun chrome £4.50
BL 2 Pistol aluminum gun £4.90
BL 3 100 mm long nose blow gun £7.50
BL 4 270 mm long nose blow gun £9.50
5 Piece Kit
5 Piece kit £29.99 includes
1 spray gun
1 degreasing gun
1 air blow gun
1 tyre inflator
1 coil of hose
1/2" Impact Wrench Kit
ER403K 1/2" Impact Wrench Kit £48.55
230 ft lbs
7 cfm
c/w Impact Sockets
AT-5040S 1/2" Impact Wrench £25.50
5cfm
AT5049a 1/2" Impact wrench only £99.40
500 ft lbs
5 cfm
Dryit Filter
MF-80 spray gun final filter £5.99
fits to inlet of spray gun
will remove oil and water
Ratchet Kits
ER30K 3/8" Ratchet Kit £41.90
50 ft lbs 4 cfm
c/w Impact Sockets
ER30 3/8" Ratchet only £25.90
ER31K 1/2" Ratchet Kit £44.90
50 ft lbs 4 cfm
c/w Impact Sockets
ER31 1/2" Ratchet only £27.90
D A Sanders Blocks Sanders Etc
ER420 D A Sander £37.90
9 cfm
6" pad
ER416 Orbital Block Sander £37.90
8,000RPM, pad size 4"X9"
8 cfm, 80PSI
3/8 Air Drills
ER700 3/8" Air Drill £30.85
4 cfm jacobs chuck
ER701 3/8" Air Drill Reversible £32.67
4 cfm jacobs chuck
ER786 3/8" Straight Drill £46.90
4 cfm 3/8 chuck
Cut Off Tool
ER516 Cut Off Tool £19.96
20,000 rpm
4 cfm
spare discs £1.60
13 Piece Spray Gun Cleaning Kit
Spray Gun Cleaning Kit £6.80
Ideal for suction, HVLP
Gravity feed ,Touch up
Air Brush etc
Various Air Hammers
AT-2050LSG Air Hammer £16.99
150mm stroke,Adjustable regulator
4 chisel bits,90PSI, 4cfm
ER 204 Air Hammer £17.50
190mm stroke
4 chisel bits 90PSI, 4cfm
AT-2010HSG Air Hammer Kit £58.50
as in picture to left
all chisels hex shank (wont spin around)
90PSI,4cfm